Canon optura Xi Instruction Manual page 105

Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIC. IN).
o
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode, 16-bit or 12-bit 4-channel sound. In above case, create a copy in SP
mode 12-bit audio sound using the analog line-in function.
o
Do not connect/disconnect any cable tolfrom the camcorder while dubbing.
o
You cannot'use the DV terminal for audio dubbing.
o
If you add sound to a tape not recorded with this camcorder, sound quality
may decrease.
o
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
~ Signal flow
SlV-250N Stereo Video Cable
(supplied)
j-]
-'~R
-
_
You can monitor the picture on the LCD screen or a TV connected via the S-video
~~
terminal, and check the sound with the built-in speaker or headphones.
105