Canon optura Xi Instruction Manual page 29

~~~~
..
X ~.~
..
~.~y'~
..
~~.~.i.~~~~ ~.~~.~.~~.i.~.~
.
1. Turn the POWER switch to OFF.
2. Close the LCD panel and return the viewfinder to its original position.
~
3. Replace the lens cap.
~
4. Unload the cassette.
5. Disconnect the power source.
When recording outdoors or through a window, do not leave LCD screen,
viewfinder or lens exposed to direct sunlight as it may cause damage.
o
Turn the power off if you do not intend to use the camcorder for a longer
time.
o
When you start recording, the camcorder counts from 1 second to 10 seconds
(recording reminder). Recordings shorter than 10 seconds may be difficult to
edit later. On the other hand, a recording not containing a particular action
should generally last no longer than 10 seconds.
o
The camcorder will shut off after 5 minutes when left in record pause mode to
protect tape and video heads. "
0
AUTO POWER OFF" appears 20 seconds
before shutoff. To continue recording, turn the POWER switch to OFF and then
back to CAMERA.
o
When you do not remove the cassette, you can record the next scene without
producing any noise or blank sections between the recordings even if you turn
the camcorder off.
o
For extra recording time, see Changing the Recording Mode (OJ 56).
o
About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques. with more than 99.99%
of the pixels operating to specification.. Less than 0.01 % of the pixels may
occasionally misfire or appear as black or green dots. This has no effect on
the recorded image and does not constitute a malfunction.
-
29