Canon optura Xi Instruction Manual page 166

Memory Card Operation
Problem
Cause Solution CD
Memory card cannot be
Memory card was not facing Turn the memory card over
108
inserted.
the correct direction. and reinsert it.
Memory card cannot be
Memory card is full. Replace the memory card or
128
recorded. erase images.
Memory card is not Format the memory card.
137
formatted.
Memory card is not inserted. Insert a memory card.
108
File number reached Set [FILE NUMBERS] to
110
maximum value.
[RESETl and insert a new
memory card.
SD Memory Card is Change the position of the
108
protected. protect switch.
Memory card cannot be Camcorder is not set to Set the camcorder to CARD
124
played back. CARD PLAY (VCR) mode. PLAY (VCR) mode.
Memory card is not inserted. Insert a memory card.
108
Camcorder does not The camcorder displays the Press the CARD STILUMOVIE 125
display movies in CARD still image playback mode. button to switch to MPEG4
PLAY (VCR) mode. movie playback.
The movie was recorded in Motion JPEG movies are 125
Motion JPEG format with displayed in still image
another camcorder.
playback mode. Press the
CARD STILUMOVIE button
to switch to still image
playback.
"
Image cannot be erased. Image is protected.
Cancel the protection.
127
SO memory card is
Change the position of the
108
protected.
protect switch.
~
flashes red.
Card error occurred. Turn off the camcorder. 137
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
Printing
-
166
The printer is not
operating even though
camcorder and printer
are correctly connected.
The camcorder is set to
NETWORK mode.
1. Set the camcorder to
CARD PLAY (VCR) mode.
2. Disconnect and reconnect
the USB cable.
3. Turn off the printer and
turn it back on.