Table of Contents
Advertisement
Quick Links
XSD35ZDN
Model:
Colour 550 TVL 560x Zoom
Speed Dome Camera
Before you begin
•
Please unpack the box carefully and identify that all the parts are present.
•
Do not cut the cables, this will void the warranty.
•
Make sure you use only the recommended power supply. Damage caused to the unit by
incorrect voltage or wiring is not covered by the warranty.
Model:
XSD35ZDN
Colour 550 TVL 560x Zoom
Speed Dome Camera
USER MANUAL
CCTV
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for XVision XSD35ZDN
Summary of Contents for XVision XSD35ZDN
-
Page 1: Before You Begin
CCTV XSD35ZDN Model: Colour 550 TVL 560x Zoom Speed Dome Camera Before you begin • Please unpack the box carefully and identify that all the parts are present. • Do not cut the cables, this will void the warranty. •... -
Page 2: Table Of Contents
Contents 1. Safety Precautions....................2 2. Symbol Description....................3 3. Features........................4 4. Contents........................5 5. Component and Structure Description ..............6 6. Camera Setting......................7 7. Camera Mounting Options ..................11 8. System Installation ....................12 9. Operation ........................ 13 10. -
Page 3: Safety Precautions
1. Safety Precautions It is advised to read the Safety Precaution Guide through carefully before operating the product, to prevent any possible danger. WARNING: This symbol is intended to alert the user to the presence of un-insulated “ dangerous voltage”. CAUTION: This symbol is intended to alert the user to presence of important operating and maintenance (Servicing) instructions in the literature accompanying the appliance. -
Page 4: Symbol Description
2. Symbol Description 1. Keyboard function keys are shown by, framed BOLD CAPITAL letters. Example: ENTER , AUTO FOCUS , etc. 2. Function key “+” indicates the order sequence. Example: 2 8 + ENTER meaning, press the function key “ 2 “, “... -
Page 5: Features
3. Features Speedy response with 35x continuous Built in 6 Alarm Inputs and one Relay auto-focus zoom lens and 16x Electronic Output. Zoom. Two types of Alarm out signal are provided: Day & Night (IR Cut Filter Change NO and NC. Mechanism). - Page 6 4. Contents DC12V TYPE 1. DC Adaptor (x1) 2. Power Line (x1) 3. Power Connector (x1) 4. Speed Dome (x1) 5. Speed Dome Cover (x1)
-
Page 7: Component And Structure Description
5. Component and Structure Description Wall Mount Ceiling Mount Corner Mount 1. Wall Mount Bracket/ Ceiling Mount Bracket/ Corner Mount Bracket 2. Machine Housing 3. Transparent Cover 4. ID Number/ Protocol/ Baud Rate Setting 5. Alarm Input or Output / Video Output / Power Input Terminal... -
Page 8: Camera Setting
6. Camera Setting SW1: ID Number Setting Connection of up to 127 Speed Dome Cameras, each camera has its own ID Number. DIP Switch setting, shown below: Setting 000, then the image display will show: DEVICE N/A. Does not affect setup. - Page 9 SW2: Baud Rate Settings Settings Switch Number Baud Rate 9600 BPS Off Off Off Off 4800 BPS On Off Off Off Off On Off Off 2400 BPS On On Off Off 19200 BPS *BOLD: Default Settings SW2: Protocol Settings Settings Switch Number Protocol Off Off Off Off...
- Page 10 Terminal base Connection, Data Line, and Signal Line Regulation 10pin Green Terminal Block SENSOR/RELAY PIN No. Definition Sensor 1 Sensor 2 Sensor 3 Sensor 4 Sensor 5 Sensor 6 4pin Green Terminal Block RS485 CONNECTOR PIN No. Definition 2pin Green Terminal Power-Input PIN No.
-
Page 11: Camera Mounting Options
7. Camera Mounting Options Outdoor Installation Structure Diagram (Wall, Corner and Ceiling Mount) Wall Mount Corner Mount Ceiling Mount... -
Page 12: System Installation
8. System Installation Once you chosen the location for your Speed Dome you will need to follow these easy steps to complete the installation. Basic operations for the keyboard controller are also outlined. Three terminal blocks and a video connection are attached to the end of the trailing lead which comes out of the top of the camera (see diagram below). -
Page 13: Operation
Control keyboard can connect up to 32 sub-systems to form one control system. Using the main control keyboard, each system can be controlled separately (see diagram). POWER POWER CLOSE WIDE CLOSE WIDE OPEN NEAR TELE OPEN NEAR TELE CAMERA CAMERA PRESET SHOT PRESET... - Page 14 FOCUS CONTROL Press FOCUS FAR : focus far and release the key to stop focusing. Press FOCUS NEAR : focus near and release the key to stop focusing. PRESET POINT SETUP The speed dome camera enables 80 preset points. Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so that you can quickly adjust the dome and PTZ to the correct position, and when necessary to view live monitoring.
- Page 15 4. Use the joystick on the control keyboard and change to the desired speed level (SPEED: 1~15). 5. Use the joystick on the control keyboard and change to the desired retention time (DWELL TIME: 1~128 sec). 6. Repeat the steps 2~5 again, to setup more group preset points. 7.
-
Page 16: Menu Operational Description
10. MENU Operational Description MENU TREE STRUCTURE MAIN MENU ITEM SELECTION NOTES STATUS SET UP ID DISPLAY ON/OFF FLIP FUNCTION ON/OFF TITLE DISPLAY ON/OFF Use number 0 as substitute TITLE SET xxxxxxxx for capital letter alphabet O CAMERA SET UP EXPOSURE SHUTTER SPEED 000~028... - Page 17 MAIN MENU ITEM SELECTION NOTES IMAGE SET UP BRIGHTNESS 000~099 FLICKERLESS ON/OFF SHARPNESS 000~015 Applicable only to high MIRROR ON/OFF resolution cameras COLOR display is applicable only to cameras without COLOUR ON/OFF DAY/ NIGHT function. ALARM SET UP ALARM PIN 001~006 Alarm Serial Number ALARM SWITCH...
-
Page 18: Quick Reference Table
11. Quick Reference Table Functions Method of Operation Upward Rotation Push the Joystick Forward (upward image monitoring) Downward Rotation Push the Joystick Backward (downward image monitoring) Leftward Rotation Push the Joystick Leftward P/T/Z Control (leftward image monitoring) Rightward Rotation Push the Joystick Rightward (rightward image monitoring) Zoom Tele Push the Joystick Clockwise... - Page 19 12. Quick Reference Table KEYBOARD MENU SETUP Functions Method of Operation Enter Main Menu MENU Cursor Up Cursor Down Menu Enter ENTER Menu Exit ENTER Decrease (-) Increase (+) Exit Main Menu MENU MENU SETUP MODE Functions Method of Operation Cursor Up Push the Joystick Forward FOCUS NEAR Cursor Down...
-
Page 20: Troubleshooting
13. Troubleshooting 1. Speed Dome Camera switched OFF Check whether the power supply is DC 12V. Check whether the fuse has burned out. Check the wiring connections to both the 2 PIN terminal block and DC plug and check to see that the electrical plug has been disconnected or switched off. -
Page 21: Specifications
14. Specifications Manual Horizontal Rotation Speed Operation 1° to 150° Per Sec. Manual Vertical Rotation Speed Operation 1° to 100° Per Sec. Manual Call on Preset Points Horizontal Rotation Speed 1° to 300° Per Sec. Manual Call on Preset Points Vertical Rotation Speed 1°... - Page 22 Electrical DC Power Supply 100V AC - 240V AC (DC 12V TYPE) Power Input DC 12V/ 2.5A or AC 24V/ 2.2A Power Consumption 27W @ DC 12V or 31W @ AC 24V by power type Heater External Temp. 180°/0.8A ± 30% Temperature Switch ON:<15°C ±...
- Page 24 CCTV TECHNICAL SUPPORT: For Technical Support for any Xvision product please contact your local distributor. LIMITED WARRANTY: This product is supplied with a 1 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
Need help?
Do you have a question about the XSD35ZDN and is the answer not in the manual?
Questions and answers