Montigo H34DF Installation & Maintenance Manual page 16

H*34DF Indoor Gas Fireplace
45° Corner Installation.
Attach an EEL-45 (45° elbow) directly onto the flue collar. Cut the
MXT-20 to suit, and attach it to the EEL-45. Slide the fireplace into
position and attach to the termination.
Figure 17. Corner installation (Rigid). (Natural Gas Models Only)
45° or less Corner Installation.
Use an MTO-4 termination and an MFL-1 or MFL-2 (12" or 24"
compressed length) and a frame, if appropriate. Flex may be turned
to obtain desired degree of angle required but must not exceed 45°.
Figure 17a. Corner Installation (Flex). (Natural Gas Models Only)
Note: Through the wall venting kits are also available for both
the Straight and the Corner Installation. The Kit includes a heat
shield, a MFL-12 (f/f) flexible pipe, and a termination with or without
a mounting frame.
Page 16
Installation
RHS 100
MXT-20
EEL-45
RHS 100
XG0146 - 150204