DOME #1
DOME #2
DOME #N
2.2 Setting protocol and baud rate of dome device
Before installation and use, the unique address for each dome and the communication protocol
including transmission speed (baud rate) should be set to correspond with the chosen control
system. The dome must be power cycled after each change.
On/Off dip switch
Impedance matching setting Protocol setting Baud rate setting
Operation Manual of Intelligent Dome Camera
CONTROLLER
Wiring Diagram for multiple domes
Display
AC24V POWER
Display
AC24V POWER
Display
AC24V POWER
CONEROLLER
/DVR/DVS.etc
Setting Impedance matching protocol and
baud rate of dome device
7
RS485