Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for RIA TECHNOLOGIES CIHSD Series
- Page 1 High Speed Dome Camera Operation Manual CIHSD Series RIA TECHNOLOGIES LIMITED 206 East Lampkin Street Starkville, MS-39759, USA Toll Free (877) 660-9271 Fax (866) 948-8254 Read manual carefully before camera installation and keep it for future reference.
- Page 2 Operation Manual of Intelligent Dome Camera Notice: Precautions: 1.Prior to operating this device, non-technicians must read this manual thoroughly. 2.Remove the power supply before operating the device to avoid damage caused by improper operation. 3.This dome device contains precision optical and electrical devices. To prevent product damage heavy pressure, shock and other incorrect operations should be avoided.
-
Page 3: Table Of Contents
Operation Manual of Intelligent Dome Camera Content Chapter 1 Product Overview ................. 3 Performance instructions ..............3 Feature functions instruction ..............3 Chapter 2 Basic Configuration ................6 Integrated connection of multiple domes ..........6 Setting protocol and baud rate of dome device ........7 Setting dome device address .............. - Page 4 Operation Manual of Intelligent Dome Camera 3.7.4 Sector setup ..................23 3.7.5 Mask zone ..................24 3.7.6 Mask color..................24 3.7.7 Motion.................... 25 System setup ..................26 3.8.1 Clear memory ................. 26 3.8.2 Restore def setting ................26 3.8.3 Color system ...................
-
Page 5: Chapter 1 Product Overview
Operation Manual of Intelligent Dome Camera Chapter 1 Product Overview 1.1 Performance Instructions 1. The address of each Dome device is from 0 2 55. The number (address) of dome devices in the ～ control system is setup by the hardware (8-digit on and off switch) of the dome device. 2. - Page 6 Operation Manual of Intelligent Dome Camera 2. Camera name and operation position and angle display. (The name of the camera can be edited and the coordinate angle of the dome device can be displayed on the screen.) 3. Operation crosshair function. (By enabling this option, the target can be captured more effectively with crosshair on the screen).
- Page 7 Operation Manual of Intelligent Dome Camera subversion of the traditional infrared lighting quick decline fatal shortcoming b. Use its power can be considered as a single point of light source characteristics, developed a variable angle infrared light With the perspective of the size of the change in one machine simultaneously follow the changes to ensure the infrared light is neither wasted nor flashlight effect, to maximize the use of infrared light, the subversion of the traditional large volume of long-range needs of the practice of tens of watts...
-
Page 8: Chapter 2 Basic Configuration
Operation Manual of Intelligent Dome Camera Chapter 2 Basic Configuration 2.1 Integrated Connection of Multiple Domes When system connection for multiple domes is performed, lightning arresters, video matrix, DVR video recorder, alarm, and other additional devices can be embedded to satisfy user’s actual need to realize system integration. -
Page 9: Setting Protocol And Baud Rate Of Dome Device
Operation Manual of Intelligent Dome Camera DOME #1 Display AC24V POWER DOME #2 Display AC24V POWER RS485 DOME #N Display AC24V POWER CONTROLLER CONEROLLER /DVR/DVS.etc Wiring Diagram for multiple domes 2.2 Setting protocol and baud rate of dome device Before installation and use, the unique address for each dome and the communication protocol including transmission speed (baud rate) should be set to correspond with the chosen control system. -
Page 10: Setting Dome Device Address
Operation Manual of Intelligent Dome Camera On/Off status Protocol type digit digit digit digit digit digit PELCO-D PELCO-P Auto detect Attention: the unique address for each dome and the communication protocol including transmission speed (baud rate) should be set to correspond with the control system. Please restart the dome after each change. -
Page 11: Camera Installation
Operation Manual of Intelligent Dome Camera 2.4 Camera Installation (Please refer to the section on Camera Installation for more details on this operation) Note: 1. Make sure the proper connection of flat flex ribbon that connects the camera module to the dome device. -
Page 12: Complete The Test (Summary)
Operation Manual of Intelligent Dome Camera 2.8 Complete the test (Summary) If you have achieved control of the dome device as described in section 2.7, the system is basically normal. Do not change the wiring or the applied settings to prevent failure and loss. If the dome does not respond to the command, or only partial functionality is achieved, verify the wiring connections (section 2.1 and 2.4) and communication setting (section 2.2, 2.3 and 2.6) carefully. -
Page 13: Chapter 3 Menu Setting
Operation Manual of Intelligent Dome Camera Chapter 3 Menu setting 3.1 Operation instructions Menu operation instruction: To make a selection, move the joystick in the Up or Down direction. The on-screen arrow points to the selected option. Moving the joystick to the Left or Right position you can change the value of your selection or enter the submenu for the selected option. -
Page 14: Dome Information
Operation Manual of Intelligent Dome Camera 3.3 Dome information Joystick down to move the cursor to press 5.Camera Options OPEN or joystick left or right to move the Set camera function. joystick to enter the menu 6. Function Programming Program and execute PTZ and Vector Scan IR-006 etc. -
Page 15: Control Options
Operation Manual of Intelligent Dome Camera 3.5 Control Options Set Auto Flip 、 A uto Focus 、 A uto AE, etc Move the joystick left/right or press OPEN to enter control options CONTROL OPTIONS 6 VECTORSCAN STILL 1 DOME ADDR STETUP 7 AUTO FOCUS 2 AUTO FLIP 8 AUTO AE... -
Page 16: Camera Options(Example: Sony Camera)
Operation Manual of Intelligent Dome Camera 3.6 Camera Options(example: sony camera) Move the joystick left/right or press OPEN to enter Camera options. CAMERA OPTIONS 1 ZOOM AND FOCUS 2 CAMERA EXPOSURE 3 OTHERS 3.6.1 Zoom and Focus 1. Zoom Speed ZOOM AND FOCUS Steps: 1 ZOOM SPEED... - Page 17 Operation Manual of Intelligent Dome Camera ⑵ . Joystick left/right to set up camera ⑵ . Joystick left/right to set up Slow SPEED. in command of different switchover (AUTO/MANUAL/IRIS etc.) CAMERA EXPOSURE CAMERA EXPOSURE 1 AE MODE AUTO 1 AE MODE AUTO 2 SLOW SHUTTER 2 SLOW SHUTTER...
- Page 18 Operation Manual of Intelligent Dome Camera select AGC Level. select Bright level. ⑵ . Joystick Left/right to set up the value of AGC ⑵ . Joystick left/right to set up Bright level. Level. CAMERA EXPOSURE CAMERA EXPOSURE 1 AE MODE AUTO 1 AE MODE AUTO...
-
Page 19: Others
Operation Manual of Intelligent Dome Camera 3.6.3 Others OTHERS 1. Move the joystick up/down to move the 1 SHARPNESS cursor to select the options. 2 BACK LIGHT 3 WB MODE AUTO 2. Move the joystick Left/Right to set up the 4 R GAIN AUTO options. - Page 20 Operation Manual of Intelligent Dome Camera . Move the joystick left/right to select “0~9” press “OPEN” to confirm, press “CLOSE” to exit. PRESET INPUT RANGE: 1 NUMBER 1~50 64~77 102~165 2 SET PRESET 3 CALL PRESET 4 DELETE PRESET 0123456789 5 NAME _____________ IRIS CLOSE WHEN DONE...
- Page 21 Operation Manual of Intelligent Dome Camera 3.Call Preset PRESET Call Preset: 1 NUMBER 1.Move the joystick left/right or press 2 SET PRESET OPEN. The lens auto switch to current 3 CALL PRESET preset position corresponding to the edited 4 DELETE PRESET 5 NAME _____________ 6 NAME DISPLAY...
-
Page 22: Program Vector Scan
Operation Manual of Intelligent Dome Camera PRESET PLEASE ENTER: 1 NUMBER WELCOME________ 2 SET PRESET ABCDEFGHIJKLMN 3 CALL PRESET OPQRSTUVW XYZ 4 DELETE PRESET 0123456789_ 5 NAME _____________ IRIS OPEN WHEN DONE 6 NAME DISPLAY IRIS CLOSE TO EXIT 6. NameDisplay Setup On/Off display on the direction PRESET name preset:... -
Page 23: Pattern
Operation Manual of Intelligent Dome Camera (items include:name/number/SP/dwell). VECTORSCAN I: Name 1 NUMBER Pr :stands for Preset Position. 2 PROGRAM A VECTORS CAN Vs stands for VectorScan. 3 RUN A VECTORS CAN Pt: stands for PTZ Tour. 4 DELETE A VECTORS CAN II: Number Programming-selection based on the name. - Page 24 Operation Manual of Intelligent Dome Camera Function: User can program three traces simulating manual operation. 3.Joy stick Up/Down to select pending PATTERN operating or programming Pattern(number 1 NUMBER 2 PROGRAM A PATTERN range:1 3 ). ～ 3 RUN A PATTERN 4.Joystick Up/Down to move the cursor to 4 DELETE A PATTERN select Program a Pattern.
-
Page 25: Sector Setup
Operation Manual of Intelligent Dome Camera 3.7.4 Sector Setup FUNCTION PROGRAMMING Sector Setup: 1 PRESET 1.Move the joystick up/down to 2 VECTOR SCAN move the cursor to select sector 3 PATTERN setup. 4 SECTOR SETUP 5 MASK ZONE 6 MASK COLOR 7 MOTION SECTOR SETUP 1 NUMBER... -
Page 26: Mask Zone
Operation Manual of Intelligent Dome Camera ⑵ . IRIS OPEN when done or IRIS CLOSE to exit without saving. 6. Name . Select the sector name and press OPEN to enter name editing. ⑴ . Edit the name referring to preset setup instruction. ⑵... -
Page 27: Motion
Operation Manual of Intelligent Dome Camera 3.7.7 Motion. MOTION << Function ： The lens will auto return to the assigned preset position or perform certain motion using 1 PARK ACTION command set by user when the camera does not 2 POWER ON ACTION receive orders from controlling device. -
Page 28: System Setup
Operation Manual of Intelligent Dome Camera Press open to save and exit,or press close to exit . End Position ⑵ Refer to End Position setting section .Direction Move the joystick left/right to select the Direction(left or right). .Operation Select the OPERATION and move the joystick left/right set up the Operation of ON/OFF. 3.8 System setup PARK ACTION 1 CLEAR MEMORY... -
Page 29: Color System
Operation Manual of Intelligent Dome Camera 3.8.3 Color System 1. Joy stick Up/Down to move the cursor to select Color System. 2. Joy stick Left/Right to select the PAL or NTSC. 3.8.4 Dome Reset 1. Joy stick Up/Down to move the cursor to select Dome Reset. 2. -
Page 30: Chapter 4 Short-Cut Operations And Specification Of Dome Device
Operation Manual of Intelligent Dome Camera Chapter 4 Short-cut Operations and Specification of Dome Device S hort-cut operation table ． ． ． ． Number of preset Control Object Call preset position Save preset position position Record line Run cruise track scanning speed Pan-Tilt Control Start line scanning... - Page 31 Operation Manual of Intelligent Dome Camera Picture freeze* Call dynamic preset Dynamic preset point point Reserve Dome reset Reset dome Main menu Call main menu Set the auto flip Pan continuous scanning Notes: 1.These functions differs depending on different types of camera. Description of the preset point: Preset point of the position: 1-50, 64-77,102-165 (totally 128) Function short-cut preset point: 51-63, 78-101...
- Page 32 Operation Manual of Intelligent Dome Camera Dome device will auto line-scan between two specified points. User can set the start point by “52+SHOT+ON” and end point by “53+SHOT+ON”. Line scanning speed set: user keep a manual line scan speed three seconds above, then through“51+SHOT+ACK”...
-
Page 33: Chapter 5 Trouble Shooting Of Dome Device
Operation Manual of Intelligent Dome Camera Chapter 5 Trouble Shooting of Dome Device 1.Problem description: After power on without any response, not lock motor nor images. Possible reason: The power circuit may have some problem Solution: Check the power cable is connected to power of AC24V. 2. - Page 34 IR006E-V1.1...