Pattern - RIA TECHNOLOGIES CIHSD Series Operation Manual

VECTORSCAN
1 NUMBER
2 PROGRAM A VECTORS CAN
3 RUN A VECTORS CAN
4 DELETE A VECTORS CAN
PROGRAM VECTOR SCAN 1
NAME NUM SP DWELL
1.
2.
3.
4.
IRIS CLOSE WHEN DONE
Vector scan track deletion steps:
I: Select pending deleting vector scan track in Number menu.
II: Joystick Up/Down to select Delete a Vector scan.
III:Joy stick Left/Right or press OPEN to delete the selected vectorscan track.
3.7.3

Pattern.

FUNCTION PROGRAMMING
1 PRESET
2 VECTORSCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
Operation Manual of Intelligent Dome Camera
1
(items include:name/number/SP/dwell).
I: Name
Pr :stands for Preset Position.
Vs stands for VectorScan.
Pt: stands for PTZ Tour.
II: Number Programming-selection
based on the name.
III: SP-Set up the speed of Preset.
IV: Dwell
Vector scan running operation steps:
I: Select pending Vector scan track in
Number menu
II: Joy stick Up/Down to select Vector scan
III: Joy stick Left/Right or press OPEN to
run the selected Vector scan track
Pattern Operation Steps:
1.Joy stick Up/Down to move the cursor to
select Pattern.
2.Joy stick Left/Right or press OPEN to
enter
21