89
91
92
93
94
95
96
101
Notes:
1.These functions differs depending on different types of camera.
Description of the preset point:
Preset point of the position: 1-50, 64-77,102-165 (totally 128)
Function short-cut preset point: 51-63, 78-101
Note: Dome operation will be different due to controller's different specs.
Preset point setting:
Press "No." + "Shot." + "ON" .
Call Preset point:
Press "No." + "Shot." + "ACK".
Clear Preset point:
Press "No." + "Shot." + "OFF".
2. Description of "cruise track" function:
a
)
When enter "51+SHOT+ON", the device is enabled system default cruise track. The device will
auto scan point by point from No.1 preset position to No.16 preset position. If certain position
has not been preset or been cleared after preset, "cruise track" will not scan them.
b
Dwell time of the preset position is 2 seconds.
)
c
About other 6 cruise tracks operation, please refer operation manual of the keyboard controller.
)
Different controller is with different operation.
3. Description of "Line-Scanning" function:
Operation Manual of Intelligent Dome Camera
Picture freeze*
Dynamic preset point
Reserve
Dome reset
Main menu
Set the auto flip
Pan continuous
scanning
On
Call dynamic preset
point
Reset dome
Call main menu
On
On
29
Off
Off