Table of Contents
Advertisement
2. Camera name and operation position and angle display. (The name of the camera can be
edited and the coordinate angle of the dome device can be displayed on the screen.)
3. Operation crosshair function. (By enabling this option, the target can be captured more
effectively with crosshair on the screen).
4. Three PTZ tours operation with 8 minutes record of each tour. (Can record real-time monitor
and the action of manual operation)
5. Six groups of programmable vector scans. (includes scan speed, dwell time, pre-shot and
interruption between tours)
6. Auto flip function with 10 degree move up.
7. 24 sectors of programmable sectional mask. (Can mask part of the sectors of camera, which
differs depending on different types of camera)
8. 8 sectors of programmable sectional display. (Can display the name and nature of concrete
position shooting by the camera)
9. Auto enter function running after self-test of the dome device and auto enter function running
when there is no transmission. (Dwell time can be set from 5 to 999 seconds)
10. Freeze video picture function. (frozen picture function)
11. Operation return function. (after executing operation return, the dome device will return to the
previous operation)
12. Operational manual scan function. (execute this function in manual pan operation, you can
adjust the manual pan operation)
13. Intelligent power off real time memory. (If power is cut off when a certain function is in
operation, the dome device will resume working where the power was cut off).
14. High efficient 3-dimension scan.
15. Camera zoom in speed limit function. (When it is zooming in, the speed
of the dome device will auto slow down).
16. Remote setting of dome address.
17. The world's most advanced high-power infrared lamp technology
a. Infrared light power conversion efficiency, heat small, long life, low power, less than 5 watts,
Operation Manual of Intelligent Dome Camera
4
Advertisement
Table of Contents
