Sector Setup - RIA TECHNOLOGIES CIHSD Series Operation Manual

3.7.4

Sector Setup

FUNCTION PROGRAMMING
1 PRESET
2 VECTOR SCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
SECTOR SETUP
1 NUMBER
2 PAN START POS
3 PAN END POS
4 TILT START POS
5 TILT END POS
6 NAME
7 NAME DISPLAY
1. Number
⑴ . Joystick left/right or press OPEN to select the sector number(number range:1
2. Pan Start POS
. Move the joystick left/right or press OPEN to select a Pan Start Point.
⑴
. IRIS OPEN when done or IRIS closess to exit without saving.
⑵
3. Pan End POS
. Move the joystick left/right or press OPEN to select a Pan End Point.
⑴
I RIS OPEN when done or IRIS closes to exit without saving.
⑵
4. Tilt Start POS
. Move the joy stick left/right or press OPEN to select a Tilt Start Point.
⑴
I RIS OPEN when done or IRIS CLOSE to exit without saving.
⑵
5. Tilt End POS
⑴ . Move the joy stick left/right or press OPEN to select a Tilt End Point.
Operation Manual of Intelligent Dome Camera
1
0.0
0.0
0.0
0.0
________
OFF
Sector Setup:
1.Move the joystick up/down to
move the cursor to select sector
setup.
2.Move the joystick left/right or press
OPEN to enter the setting.
23
～ 8 ).