Table of Contents
Advertisement
3.5 Control Options
Set Auto Flip
、
A uto Focus
OPEN to enter control options
CONTROL OPTIONS
1 DOME ADDR STETUP
2 AUTO FLIP
3 PROPORTIONAL SPD
4 PAN REVERSE
5 TILT REVERSE
3.5.1 Dome Addr Stetup
DOME ADDR SETUP
1 ADDR TYPE
2 DOME ID
3 BROADCAST ID
3.5.2
Control Option Operation
Move the cursor to select Auto Flip/Proportional Speed/Pan Reverse/ Tilt Reverse/Vector Scan
Still/Vector Scan AF/+2 Tilt Limit/Speed Limit.
Move the joystick left/right or press OPEN to Display on/off/PTZ/Z/OFF
1. Auto Flip: If the camera lens auto rotates pan 180° then tilt 10° to auto track forward when the lens
goes down tilt 90° .
2. Auto AE: If the camera is AE when the dome device changes its pan or tilt or zoom.
3. Vector Scan AF: If the camera AF when vector scan is running.
4. Speed Limit: the moving speed of dome device matching the video ratio to lower the speed.
Operation Manual of Intelligent Dome Camera
、
A uto AE, etc Move the joystick left/right or press
ON
ON
OFF
OFF
PHYSIC
1
OFF
6 VECTORSCAN STILL
7 AUTO FOCUS
8 AUTO AE
9 VECTORSCAN AF
10 -2 TILT LIMIT
11 SPEED LIMIT
1. Joystick left/right to setup the addr type.
addr type through Physic/Logic.
2.Joystick left/right to change the dome ID(only when
addr type selects logic).
3. Joystick left/right to setup the broadcast ID
ON/OFF.
13
OFF
PTZ
PTZ
OFF
OFF
OFF
Advertisement
Table of Contents
