Table of Contents
Advertisement
⑵
. IRIS OPEN when done or IRIS CLOSE to exit without saving.
6. Name
. Select the sector name and press OPEN to enter name editing.
⑴
. Edit the name referring to preset setup instruction.
⑵
7. Name Display
. Joy stick Up/Down to move the cursor to select Name Display of ON or OFF.
⑴
3.7.5
Mask Zone
Function: User can protect the partial area by mask setting from the whole monitoring area
according to the situation.
MASK ZONE
1 NUMBER
2 MASK EDIT
3 MASK DISPLAY
2.Mask Edit
.Joy stick Up/Down to move the cursor to select Mask Zone.
. Joy stick Left/Right or press OPEN to enter editing.
⑵
. Press OPEN to edit the mask zone, capture the mask point. Press NEAR, FAR (set the mask
⑶
area in pan action), WIDE, TELE (set the mask area in tilt action) to adjust the area of mask zone.
Press CLOSE to exit when done and return to upper stage menu.
3.Mask Display
.Joystick Left/Right to set up the display name of ON/OFF.
3.7.6
Mask Color.
MASK COLOR
1 MASK COLOR
2 SEMI-TRANSPARENCY OFF
2. Semi-transparency
. Joy stick Up/Down to move the cursor to select SEMI-TRANSPARENT.
⑵
. Joy stick Left/Right to set up the Semi-transparency of ON/OFF.
Operation Manual of Intelligent Dome Camera
1
OFF
GRAY 5
1
. Number
. Joy stick Up/Down to move the cursor
⑴
to select NUMBER.
⑵
. Joy stick Left/Right to select pending
editing mask areas(from area1-24).
1. Mask color
. Joy stick Up/Down to move the cursor
to select MASK COLOR.
.Joy stick Left/Right to move the cursor
to select the Mask color.
24
Advertisement
Table of Contents
