Table of Contents
Advertisement
1.1 Performance Instructions
1. The address of each Dome device is from 0
control system is setup by the hardware (8-digit on and off switch) of the dome device.
2. Integrated multi-protocol and auto protocol differentiation. Note: The dome device only has auto
differentiate control of the first communication.
3. Pan 360 degree continuous scanning.
4. Tilt 90 degree action plus 2 degree angle adjustment. Plus the 2 degree adjustment, the view
angle can be 90 or 92 degree.
5. Pan manual operation speed can be 0.1 to 150 degree per second.
6. Tilt manual operation speed can be 0.1 to 55 degree per second.
7. 128 pre-shot positions (A fixed position that can be aimed by the dome camera, which can be set
and revised by user arbitrarily)
8. The maximum running speed when pre-shot is being utilized can reach 240 degree per second
with accuracy of ±0.1 degree.
9. Compatible with many camera modules (Sony, Hitachi, Sanyo, Yoke, CNB, LG, Haitron, Samsung,
DaHua)
10. Power supply: AC 24V1A (indoor type), AC 24V2A (outdoor type).
11. Easy installation interface.
12. Pass environmental protection grade IP66 (outdoor type).
13. Adopts long distance RS-485 transmission mode.
14. Transmission speed, i.e. Baud rate is selectable. (Set by the sixth and seventh bit of the on and
off switch of the dome device.2400bps~19200bps)
1.2 Feature Functions Instruction
1. English operation menu and function display.
Operation Manual of Intelligent Dome Camera
Chapter 1 Product Overview
2 55. The number (address) of dome devices in the
～
3
Advertisement
Table of Contents
