Printer (Nkg-91) - JRC JHS-770S Instruction Manual

10.3

Printer (NKG-91)

The thermal head of the printer may be very hot after printing.
Perform paper replacement and head cleaning only after waiting for the head to
completely cool.
The printing paper used in this printer is a heat sensitive paper. Take the following
precautions when using this paper.
· Store the paper away from heat, humidity, or heat sources.
· Do not rub the paper with any hard objects.
· Do not place the paper near organic solvents.
· Do not allow the paper to come in contact with polyvinyl chloride film, erasers, or
adhesive tape for long periods of time.
· Keep away the paper from freshly copied diazo type or wet process copy paper.
1
2
3
■
Loading the printer paper
1 .
1 .
1 .
Press the paper cover open button.
The paper cover will open.
2 .
2 .
2 .
Insert the paper as shown in the diagram at right.
Position the paper such that the edge extends outside the
printer, and press the both sides of the paper cover to
close it.
Note
The printer will be turned on and off simultaneously with the radiotelephone.
CAUTION
1.
2.
3.
■
Options Operation
Do not touch it.
Paper cover open button
Paper cutter
Paper cover
10-3