Using Memory Channels - JRC JHS-770S Instruction Manual

4.2.6

Using memory channels

Memory channels are the original channel list. The desired channels (e.g. frequently using channel)
can be registered and used for easy access.
(1) Registering memory channels
■ ■
Procedure
1 .
1 .
1 .
Press the
MENU
hierarchical menus, select 7.3.2
Registration.
The registration menu of the 7.3 Memory channel
will be displayed as shown at right.
2 .
2 .
2 .
Move the cursor to the desired list
number and press ENT using the jog dial,
or press the memory channel number
(two digits) by numeric keys directly.
Then select a channel type.
First, CH will be displayed.
type by turning the jog dial (CH → P0 → P1 →
P2 → W → CL), or clear the channel type.
The content of each type is as described below.
・ CH : Region channel
・ P0/1/2 : Private channel (with a hundred digit)
・ W : Weather channel
(CL : Deletes the memory channel)
3 .
3 .
3 .
Press ENT after selecting a channel type.
Then input the channel number using the
jog dial or numeric keys.
4 .
4 .
4 .
Press ENT after inputting the channel
number. Then select the channel region.
(If selected a private or weather type at step 2,
skip this step.)
First, (ITU) will be displayed.
channel region by turning the jog dial (ITU →
USA → CAN → IWW).
key and, through
Select a channel
Select a
7.3.2)Registration
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.
07.
7.3.2)Registration
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.CH
07.
7.3.2)Registration
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.CH01
07.
7.3.2)Registration
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.CH01(ITU)
07.
Operation
4-9