JRC JHS-770S Instruction Manual page 110

Operation
Coast sta no answer.
Confirming channel free...
Data updating...
DISTRESS call starts in Xsec
DISTRESS pressed by xxxxxxxxxx and starts
in Xsec
Erase all data?
Erase this number?
Invalid address
Invalid TEL number
Invalid value
Invalid work CH
Is it OK to break PSTN mode?
Left without operating...
This process will be canceled soon.
Lost the radio receiving signal.
No signal detected in the Work-CH.
Now continuing DISTRESS call mode.
Break this mode?
OK to "sleep" this no access right controller?
4-66
After the PSTN call, there is no answer
OK
from the coast station.
To send the DSC call (routine calls or
Cancel test), confirming if the CH70 is free, or
waiting until the CH70 becomes free.
-----
Updating the AIS information.
Detected keeping the
----- key held down, and the distress call will
be sent in X seconds.
The
-----
has been held down now, and the
distress call will be sent in X seconds.
Is it ok to erase every station data of
this station list?
OK/ Cancel
OK:
Cancel:
Is it ok to erase this station data?
OK/ Cancel
OK:
Cancel:
The DSC calling address is empty or
OK
invalid.
The recipient telephone number for a
OK
PSTN call is empty or invalid.
An invalid value is detected during a
OK
process of a task.
The work channel data for the DSC call
OK
is empty or invalid.
Pressed the
PSTN communication mode. Is it ok to
OK/ Cancel
break?
OK:
Cancel:
This process will be canceled in 1 min
and returns to the status display
-----
condition because the controller has
been left for 9 min without operating.
Lost the carrier receiving at the work
OK channel during the PSTN mode, and
breaks the communication.
The transceiver shifted to the specified
work channel to start the PSTN
OK
communication, but cannot detect the
carrier from the coast station.
Pressed the
distress call mode.
Continue/ Break
Continue: Continues the distress mode.
Break:
Pressed the
this controller without the access rights.
Sleep/ Cancel Is it ok to enter the sleep mode?
Sleep:
Cancel:
DISTRESS
DISTRESS key of xxxxxxxxxx
Erases all data.
Ceases this operation.
Erases this station data.
Ceases this operation.
CANCEL key during
Breaks the PSTN mode.
Continues the PSTN mode.
CANCEL key during the
Is it ok to break?
Breaks the distress mode.
DIM + PWR
Enters the sleep mode.
Ceases this operation.
keys at