Changing The Channel Region - JRC JHS-770S Instruction Manual

Operation
4.2.9

Changing the channel region

This menu sets the channel region to ITU, USA, Canada, or Inland Waterway.
■ ■
Procedure
1 .
1 .
1 .
Press the
MENU
hierarchical menus, select the 7.6 Region.
2 .
2 .
2 .
Move the cursor to the desired line and
press ENT using the jog dial, or press a
numeric key directly.
When selected the USA channel, the screen will
become as shown at right.
When set to the Inland Waterway (IWW), changed a few functions as follows.
Note
- Enabled the ATIS function automatically and sends the ATIS code over the
- Disabled the scan or dual watch functions.
- When operating the DSC menus, a popup screen will be displayed to notice that
4-12
key, and through
voice channel when releasing the PTT key.
continuously, sends the ATIS code every five minutes automatically.
the DSC usage is not allowed on Inland Waterways.
7.6)Region
1.ITU channel [ITU]
2.USA channel [USA]
3.Canada channel [CAN]
4.Inland channel [IWW]
0.Back
Station1 TIME 23:59(UTC)
POS
EXT 179ﾟ59'W
1 6
CH
[USA]
SQL
CH70 CH
SW
Also, if pressed the PTT key
89ﾟ59'S