Software Version - JRC JHS-770S Instruction Manual

6.4
Checking the setup condition
The system information can be confirmed for use in maintenance and inspection.
6.4.1 System information
The following describes the procedure to display such as the ID numbers or peripheral connection conditions.
■ ■
Procedure
1 .
1 .
1 .
Press the
MENU
menus, select the 8.3 System information.
The screen as shown at right will be displayed.
If necessary, scroll with the jog dial.
Note
The confirmable information is described below.
Item Name
Self-ID Own ship's identification number (MMSI)
Group-ID The identification number of the group own ship belongs to
ATIS-ID The ATIS number for European inland waterways
Num of CTLRs The number of connected controllers
Own CTLR ID The address number of this controller
WKR The setting status to use the watch-keeping receiver
User key asgn The menu assigned to the user defined key
Priority CH The registered priority channel number
Hook switch The setting status to use the handset hook detection
The setting status to monitor communications of a controller at the
TX monitor
other controllers and the external speaker
The setting status to use the automatic startup function in sleep
Alarm wake-up
mode if receiving a distress signal
AIS info The AIS connection status (Receiving/ Disrupted/ Invalid)
AME info The AME connection status (Normal/ CS error/ Invalid)
Serial number The serial product number of the JHS-770S/780D
6.4.2

Software version

To confirm the software version, press the
key and through hierarchical menus, select the 8.4
Software version.
The software version number of the transceiver and
controller will be displayed as shown at right.
key, and through hierarchical
Contents
MENU
Maintenance & Inspection
8.3)System information
Self-ID :123456789
Group-ID :012345678
ATIS-ID :9431011234
Num of CTLRs :4
Own CTLR ID :2
WKR :Valid
User key asgn :AIS screen
Default setting: Valid
Default setting: CH16
Default setting: Valid
Default setting: ON
Default setting: ON
8.4)Software version
- Transceiver : 1.00
- Controller : 1.00
0.Back
Notes
6-7