JRC JHS-770S Instruction Manual page 114

Settings & Registrations
4 .
4 .
4 .
To input the present time (UTC), press ENT.
Input the hours and minutes with the numeric keypad
or jog dial. (When using the jog dial, select the value
and press ENT for each digit.)
To finish this menu, place the cursor on the any one
of the selective items and press the
In addition to the above, the following items can be set in this menu.
Note
- Type:
- UTC/LT:
- LT diff:
- Date format:
5-2
CANCEL key.
Select a type shown on the status display from below.
・ "Time,pos" : Displays both of the present time and position.
・ "Time" : Displays only the present time.
・ "Pos" : Displays only the present position.
Select a type of time shown on the screen.
Set the local time difference to display the local time.
Select a type of date shown on the DSC message lists or the alarm history
from below.
・ " 'YY-MM-DD" : Displays December 31, 2006 as '06-12-31.
・ " MMM DD,'YY"： Displays December 31, 2006 as Dec 31,'06.
・ " DD MMM,'YY"： Displays December 31, 2006 as 31 Dec,'06.
9.1)Date & time
1.Date :'06-12-31
2.Present time : 23:59
3.Display form
- Type : Time,pos
- UTC/LT : UTC
- LT diff : :
- Date format :'YY-MM-DD
0.Back