JRC JHS-770S Instruction Manual page 54

Operation
5 .
5 .
5 .
Press ENT after finished the steps above.
Then saved the memory channel number
and the cursor moves to the next number.
When registering other channels or revising
existing lines, repeat the steps 2 - 5 above.
- The above procedures are for registering a channel in an empty line.
Note
editing an existing memory channels is as well.
- To delete a registered memory channel, select CL at step 2 of the procedure above.
(2) Communicating on a memory channel
Memory channels will be available e.g. when setting a working channel for subsequent communication
after initial contact on CH16.
■ ■
Procedure
1 .
1 .
1 .
Press
FUNC
The 7.3.1 Memory CH list will be displayed as
shown at right.
2 .
2 .
2 .
Move the cursor to the desired list number
and press ENT using the jog dial, or press
the memory channel number (two digits) by
numeric keys directly.
In this example, if selected the memory channel
number 05, CH P002 will be set.
4-10
MEM
3
.
CALL
7.3.2)Registration
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.CH01(ITU)
07.
7.3.1)Memory CH list
01.CH71(ITU)
02.CH60(CAN)
03.CH05(ITU)
04.P001
05.P002
06.CH01(ITU)
07.
Station1 TIME 23:59(UTC)
POS
EXT 179ﾟ59'W
02
CH P0
SQL
CH70 CH
SW
However
89ﾟ59'S