Popup Screens - JRC JHS-770S Instruction Manual

4.8

Popup screens

The contents of the popup screens are as follows. (in alphabetical order)
Message
Acknowledged!
Accept it and abort this menu immediately?
Acknowledged!
From: xxxxxxxxx
Shifting CH now...
AIS information
Detected this ship in the vicinity.
MMSI: xxxxxxxxx
AIS information
Detected this ship in the vicinity.
xxxxxxxxxxxxxxxxxxxx
Attention!
DSC usage is NOT allowed on Inland
Waterways.
Attention!
Specified a duplex channel used for a coast
station comm.
Attention!
Normally, this call should be sent to a coast
station.
Attention!
Restarting distress call soon...
Attention!
Send this call only when being directed by
administration.
Channel connection completed.
Lift handset please.
Channel dial op is invalid right now.
To enable it, press FUNC, and ENT.
CHxx SQL Setting
Register or erase the SQL level?
Buttons
Received a DSC acknowledgement
(ACK BQ) during menu operation.
Accept/ Ignore Accept:
Ignore:
Received a PSTN acknowledgement
from the coast station
-----
and the transceiver is shifting to the
specified work channel now.
Detected the ship
OK the AIS information within the specified
sea area.
Detected the ship
OK
in the AIS information within the
specified sea area.
DSC usage is NOT allowed on Inland
Waterways.
Continue/ Cancel
Continue: Enforces the DSC operation.
Cancel:
When calling a ship or a group by the
DSC, specified a duplex channel as a
work channel, which is used for a coast
Continue/ Cancel
station communication.
Continue: Enforces the operation.
Cancel:
When sending a distress relay call, it
should be normally addressed to a
Continue/ Cancel
coast station.
Continue: Continues the operation.
Cancel:
DSC resends the distress call
-----
automatically soon.
To send the distress acknowledgement
or the distress relay acknowledgement,
the consulting with RCC or a coast
Continue/ Cancel
station is necessary.
Continue: Continues the operation.
Cancel:
The channel connection via the DSC
-----
has been completed. Please start the
communication using the handset.
The channel operation with the jog dial
is disabled right now.
-----
press the
order.
Register or erase the preset squelch
level of the xx channel.
REG/ Erase
REG:
Erase:
Operation
Description
Closes the menu and shows
the message immediately.
Closes this popup only.
(MMSI: xxxxxxxxx)
(MMSI: xxxxxxxxx)
(named xxxxxxxxxxxxxxxxxxxx)
Ceases the DSC operation.
Ceases the operation.
Ceases the operation.
Ceases the operation.
To enable it,
FUNC key and ENT in
Registers the current level.
Erases the preset condition.
,
in
4-65