Centrifugal Oil Filter – Cleaning And Filter Sleeve Replacement - MTU 8 V 2000 M84 Operating Instructions Manual

7.14.2 Centrifugal oil filter – Cleaning and filter-sleeve replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Strap wrench
Cold cleaner (Hakutex 50)
Filter sleeve
O-ring
O-ring
WARNING
Compressed air
Risk of injury!
• Do not direct compressed-air jet at persons.
• Wear protective goggles / safety mask and ear protectors.
Removing rotor of centrifugal oil
filter
1. Release nuts (3).
2. Remove housing cover (1).
3. Remove complete rotor (2) from housing.
100 | Task Description | MS150062/01E 2012-01
Part No.
F30379104
50622
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
Qty.
1
1