16.
Tighten nut (3) to specified tightening torque using a torque wrench.
Name
Nut
17.
Fit gasket (10).
18.
Install cover.
19.
Install screw (1), washer (2) and nut (9).
20.
Tighten nut (9).
21.
Open ball valve at the inlet and outlet of the fuel treatment system.
Result:
The fuel treatment system is ready for operation.
124 | Task Description | MS150062/01E 2012-01
Size
Type
M16
Tightening torque
Lubricant
Value/Standard
(Engine oil)
30 Nm +3 Nm