MTU 8 V 2000 M84 Operating Instructions Manual page 74

Checking diaphragms
1. Remove cover (4).
2. Take off spring (5), gasket (2) and dia‐
phragm (3).
3. Check diaphragm (3) for damage.
4. Replace diaphragm if damaged.
5. Install diaphragm (3) on housing (1).
6. Install new gasket (2) and spring (5) togeth‐
er with cover (4).
7. Tighten screws of cover (4) to specified tightening torque.
Name
Screw
8. Check diaphragms in further oil separators in the same way.
74 | Task Description | MS150062/01E 2012-01
Size Type
Tightening torque
Lubricant Value/Standard
6 Nm + 2 Nm