Maintenance; Maintenance Task Reference Table [Ql1] - MTU 8 V 2000 M84 Operating Instructions Manual

5 Maintenance

5.1 Maintenance task reference table [QL1]

The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The
Maintenance Schedule is a stand-alone publication.
The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.
Task Maintenance tasks
W0500 Check engine oil level
W0501 Visually inspect engine for leaks and general condition
W0502 Check intercooler drain (if fitted)
W0503 Check signal ring position of service indicator on air filter
W0505 Check relief bores of coolant pump(s)
W0506 Check engine for abnormal running noises, exhaust color
and vibrations
W0507 Drain water and contaminants from fuel prefilter (if fitted)
W0508 Check reading on differential pressure gauge of fuel prefilter
(if fitted)
W1001 Replace fuel filter or fuel filter element
W1002 Check valve clearance
W1005 Replace air filter
W1006 Replace fuel injectors
W1008 Replace engine oil filter at each oil change or when the time
limit (years) is reached, at the latest
W1009 Check layer thickness of oil residue, clean and replace filter
sleeve (if fitted) at each oil change or when the time limit
(years) is reached, at the latest
W1011 Perform endoscopic inspection of combustion chambers
W1036 Replace coolant filter
W1140 Clean wire meshes of crankcase breather
W1244 Check operation of rod electrode (if fitted)
W1245 Check alarm function of differential pressure gauge (if fitted)
W1246 Check pump capacity (if fitted)
Table 1: Maintenance task reference table [QL1]
(→ Page 96)
(→ Page 45)
(→ Page 91)
(→ Page 94)
(→ Page 113)
(→ Page 45)
(→ Page 86)
(→ Page 85)
(→ Page 83)
(→ Page 75)
(→ Page 92)
(→ Page 79)
(→ Page 98)
(→ Page 100)
(→ Page 68)
(→ Page 115)
(→ Page 72)
(→ Page 121)
(→ Page 120)
(→ Page 122)
MS150062/01E 2012-01 | Maintenance | 53