Cylinder-Head Cover - Removal And Installation - MTU 8 V 2000 M84 Operating Instructions Manual

7.5.2 Cylinder-head cover – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Centering device
Gasket
Preparatory steps
1. Remove air filter (→ Page 93).
2. Remove intake housing.
Cylinder-head cover – Removal
and installation
1. Remove screws (1).
2. Remove cylinder-head cover (2) with gas‐
ket from cylinder head.
3. Clean mating faces.
4. Check condition of gasket of cylinder-head
cover.
Result: Replace damaged gasket(s).
5. Center cylinder-head cover (2) with center‐
ing device.
6. Use torque wrench to tighten screws (1) to
specified torque 20 Nm.
Final steps
1. Install air filter (→ Page 93).
2. Install intake housing.
3. Check cylinder-head covers for leaks.
78 | Task Description | MS150062/01E 2012-01
Part No.
F6783025
(→ Spare Parts Catalog)
Qty.
1