Casio QT-2100 Service Manual page 56

[ 23 ] MCR test
The test checks the fixed data and read data comparison.
Operation : 9 6 SUBTOTAL
Note1 : To stop the test, press "Esc" key.
[ LCD ]
MCR 96
MCR1 OK
MCR2 OK
END 96
Note1 : MCRI = Trock1
MCR2 = Trock2
MCR1 ERR *************************
******************************
(When the trock1 data is incorrect)
Note2 : In case of error, the read data is displayed.
[ 24 ] To exit the diagnostic mode
To escape the diagnostic mode, execute INITIALIZE (MAC) operation.
MCR
MCR1
MCR2
END
[ ERROR DISPLAY ]
MCR1 ERR
******************************
Read data
(When the trock2 data is incorrect)
— 54 —
[ PRINT ]
96
OK
OK
96
*************************