Casio QT-2100 Service Manual page 15

5. Move the LCD unit to the left and remove the LCD cover.
Note: Lift 1 up slightly and move it in the direction of 2.
2
6 Remove the two connectors (CN1, CN2) as well as the earth cable, and then the LCD unit.
7. Remove the two stoppers and the inverter.
Note: When fixing the Hinge case, put the blind sheets in the direction in the figure below first and fix it by
positioning the slide switch in the center.
1
slide switch
blind sheet x 2
— 13 —
Hook
Earth cable
CN1 CN2