Casio QT-2100 Service Manual page 59

Prompt message
E083 Cannot create Electronic
jourual file.
Check flash memory.
∗∗∗∗∗∗∗∗∗∗
E105 Check/TBL Tracking Master
down. Please call Manager.
YES : Retry for connection.
NO : Remove it from system.
∗∗∗∗∗∗∗∗∗∗
E106 Check/TBL Tracking Backup
master down. Please call
Manager.
YES : Retry for cennection .
NO : Remove it from system.
∗∗∗∗∗∗∗∗∗∗
E107 Both Master&Backup master
down. CHK/TBL tracking or
Clerk interrupt is not available.
∗∗∗∗∗∗∗∗∗∗
E108 CHK/TBL Master is removed
from system.
∗∗∗∗∗∗∗∗∗∗
E109 CHK/TBL Backup master is
removed from system.
E110 CHK data mismatch between
Master and Backup master.
E130 Middle of Pick up or Loan
Press Cancel Key.
E131 Middle of <Bill Copy>
Press Cancel Key.
E133 Middle of <Media Change>
Press Cancel Key.
E134 Middle of Clerk Transfer
Press ESC Key.
E136 Middle of <Separate Check>
Press ESC key.
E139 Not allowed to be negative by
Minus/Coupon key.
E140 Wrong menu.
E141 Press <TRAY TOTAL> twice
before finalization.
E145 Arrangement syntax error.
E150 Incorrect value entry.
E151 Incorrect key Pressed.
E152 PGM File or Memory number
does not Exist.
E164 Employee No. is not Found
in the Employee File.
E165 Employee No. is not
Clocking-in.
E166 Employee No. is Occupied
E167 Incorrect JOB coad
Electronic journal file cannot be created.
CHK master down
"∗∗∗∗" means ECR logical ID.
CHK BM down
"∗∗∗∗" means ECR logical ID.
CHK M/BM down
"∗∗∗∗" means ECR logical ID.
Master down then take it off from system
"∗∗∗∗" means ECR logical ID.
Backup master down then take it off from system
"∗∗∗∗" means ECR logical ID.
Data mismatch has occurred.
During picking up
During Bill copy
Dutrng Media CHG
During CLK Trans
During SEP CHK
Credit balance error
This sheet holder is prohibited by PGM.
This sheet holder is prohibited by PGM.
Arrangement syntax error.
Incorrect entry for PGM.
Linking is incorrect.
No such file, no such record.
Employee No. is not set in the Employee File.
Employee has not done CLOCK-IN operation yet.
Employee who has done CLOCK-lN operation attempts
to operate CLOCK-IN again.
Employee attempts to operate CLOCK-IN with
incorrect JOB code.
— 57 —
Meaning