Best Pfm Mode; X-Over Seam Assist Mode - Brother S-7300A-333P Instruction Manual

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-5-8. Best PFM mode

The treadle can be set to turn the functions for preventing the thread from pulling out ("Prev. thread away" function) and
the function for preventing short thread trailing lengths ("T/T short" function) on and off.
(The "Prev. thread away" function is added at the sewing start, and the "T/T short" function is added after thread
trimming operation.)

5-5-9. X-over seam assist mode

X-over seam sewing using the X-over seam sensor can be set to on or off.
35
Both the "Prev. thread away" function and the "T/T short" function
are disabled.
The thread pull-out prevention function is enabled.
The "T/T short" function is enabled.
Both the "Prev. thread away" function and the "T/T short" function
are enabled.
X-over seam assist is disabled (normal sewing is carried out).
X-over seam assist is enabled.
When the X-over seam sensor detects an X-over seam, the
sewing speed, feed locus, feed timing and stitch pitch are changed
to the special settings for X-over seam sewing.
S-7300A
Setting details
Setting details