Sewing Start Step Setting - Brother S-7300A-333P Instruction Manual

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

6-3. Sewing start step setting

If sewing is interrupted by a problem such as a thread breakage occurring and you need to resume sewing from the point
where sewing was interrupted, you can start sewing from the middle of a step.
1
Switching to sewing start step setting mode
2
3
(1)
43
1. At the detailed home screen, press the menu key.
2. At the menu screen, select "Program setting" to switch to program setting
mode.
3. Next, in program setting mode, select "Step setting for start" to switch to
sewing start step setting mode.
・ Select the step number for the step where you would like sewing to start
from.
・ The step number (1) for starting sewing will be displayed.
・ Depress the treadle to start sewing from that step. When sewing is
finished, the sewing start step number (1) is cleared and the display returns
to the normal detailed home screen.
* If the program number is changed or the power is turned off and back on,
the sewing start step number (1) will be cleared even if sewing is not
carried out.
S-7300A