Sewing; Using The Thread Wiper - Brother S-7300A-333P Instruction Manual

7. SEWING

Attach all safety devices before using the sewing machine. If the machine is used without these devices attached,
injury may result.
Turn off the power switch at the following times.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
 When threading the needle
 When replacing the bobbin and needle
 When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your
feet or cause other injuries.
Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand
is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.
7-1. Sewing

7-2. Using the thread wiper

CAUTION
1. Press the power ON switch (1).
0900D
The power indicator (2) will illuminate.
2. Carry out the programming which is necessary for sewing.
(Refer to "Using the operation panel".)
3. Depress the treadle to start sewing.
1. Press the thread wiper key (1) so that it illuminates.
2. The thread wiper (2) will operate after the thread is
trimmed.
(1)
0898D
S-7300A
7. SEWING
60