Download  Print this page

Other Cords - Brother S-7300A-333P Instruction Manual

S-7300a series
Hide thumbs

Advertisement

3-4-2. Other cords

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the cover of the control box. Touching areas where high voltages are present can result in severe
injury.
For Europe specifications, Americas 220V specifications and 100 V/400 V system specifications, connect the cords according
to the respective specifications.
<Seen from underneath table>
DANGER
Control box
Green and yellow wire (ground wire)
S-7300A
< Europe specifications >
(1) Filter box
(2) Screws [4 pcs]
(3) Connector
(4) CE bush plate
(5) Screws [2 pcs]
(6) CE D cord cover
(7) Screws [2 pcs]
(8) Staples [5 pcs]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and
yellow wire is the ground wire.)
2. Insert
properly-grounded electrical outlet.
NOTE:
・ Take care when tapping in the
staples (8) to make sure that they
do not pierce the cords.
・ Do
otherwise
problems may result.
Leg
0943D
3. INSTALLATION
the
power
plug
into
not
use
extension
cords,
machine
operation
a
10

Hide quick links:

Advertisement

loading

  Related Manuals for Brother S-7300A-333P