Design Stitch Registration Method - Brother S-7300A-333P Instruction Manual

6-6. Design stitch registration method

Up to 5 different types of design stitches (DS-1 to DS-5), each one consisting of several different pitch groups (up to a
maximum of 8 groups), can be registered.
A single group can be set to contain up to a maximum of 20 stitches with the same stitch pitch.
This section shows an example of how to register a design stitch which contains the following eight kinds of stitches into DS-1.
Group 1 Group 2
1mm×3 stitch 2mm×2 stitch
1
Switching to add/delete step mode
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
DS-1
Group 3 Group 4
4mm×1 stitch 2mm×2 stitch
1. At the menu screen, select "Design stitch registration" to switch to the
design stitch registration (number selection) screen.
2. Next, select the design stitch number to be registered from DS-1 to DS-5.
S-7300A
DS-1
Group 1 Group 2
1mm×3 stitch 2mm×2 stitch
46