6.2
6/1553-DBC 444 01 Uen B4 2014-03-26
Action (Cont.)
Switch from headset to
handsfree
Headset
Using a headset allows you to make and receive calls without using the
handset.
The telephone supports wireless headsets that enable the user to
answer and end calls remotely, via the headset.
•
If you are using a wired headset, connect the headset cable to the
connector marked
•
If you are using a wireless headset, connect the radio base to the
connector marked
Note: Using a wired headset requires an adapter cable, see 2.1.2
Required Headset Adapter on page 4.
Action
Answer a call
Make a call
Clear a call
Change the volume
Switch from headset to
handset
Switch from handset to
headset
By default, the phone is set to connect calls to the loudspeaker. If you
are using a headset, you can switch to the headset preset mode to have
calls connected to the headset instead.
Procedure (Cont.)
Press
.
.
.
Procedure
Press
.
Press
and dial the desired number.
In headset preset mode, you are not
required to press the headset key.
Press
.
Press
The new volume setting is stored.
Lift the handset.
Press
and replace the handset.
H
H
ANDSFREE AND
EADSET
to change the volume.
40