2-10 Onboard Led Indicators; Lan Leds; B. Ipmi Lan Leds - Supermicro SUPERO X10DRW-i User Manual

2-10 Onboard LED Indicators

LAN LEDs

The LAN ports are located on the IO Back-
plane on the motherboard. Each Ethernet
LAN port has two LEDs. The yellow LED on
the right indicates activity. Link LED, located
on the left side of the LAN port, may be
green, amber or off indicating the speed of
the connection. See the tables at right for
more information.
IPMI_LAN LEDs
In addition to LAN 1/LAN 2, an IPMI_LAN
is located on the I/O Backplane of the
motherboard. The yellow LED on the right
indicates activity, while the Link LED on the
left indicates the speed of the connection.
See the table at right for more information.
SP1
BMC
IPMI
J35
Flash
BIOS
PCH
I-SGPIO2
I-SGPIO1
JBT1
LED2
JPME2
JSTBY1
JL1
A
LAN1 USB2/3(3.0)USB0/1(3.0)
LAN2
UID-SW
LAN
CTRL
X10DRW-i(T)
Rev. 1.01
CPU2
CLOSE 1st
BIOS
LICENSE
CPU1
CLOSE 1st
OPEN 1st
JVR1
2-37
Chapter 2: Installation
LAN 1/2
Link LED
Rear View (when facing the
rear side of the chassis)
GLAN Activity Indicator
LED Settings (Right)
Color Status
Yellow Flashing
LAN Link Indicator
LED Settings
LED Color Definition
Off No Connection, 10 or 100 Mbps
Green 10 Gbps (X10DRFR-T Only)
Amber 1 Gbps
IPMI LAN
Link LED
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State
Link (Left) Amber: 1 GB
Off: No Connection
Activity (Right) Yellow:
Blinking
VGA
IPMI_LAN
B
OPEN 1st
Activity LED
Definition
Active
Activity LED
Definition
Active
A. LAN1/2 LEDs

B. IPMI LAN LEDs

B
A