Video Connection; Ethernet Ports - Supermicro SUPERO X10DRW-i User Manual

Video Connection

A Video (VGA) port is located next to
USB 0/1 on the I/O backplane. Refer
to the motherboard layout below for
the location.

Ethernet Ports

Two Ethernet ports (LAN1, LAN2)
are located on the I/O backplane.
These Ethernet ports support 10G
LAN connections on the X10DRW-iT,
and Gigabit LAN connections on the
X10DRW-i. In addition, an IPMI_Dedi-
cated LAN that supports Gigabit LAN
is located above USB 0/1 ports on the
backplane. All Ethernet ports accept
RJ45 type cables. Please refer to the
LED Indicator Section for LAN LED
information.
UID-SW
LAN
CTRL
BIOS
LICENSE
SP1
BMC
IPMI CLOSE 1st
J35
Flash
BIOS
PCH
I-SGPIO2
I-SGPIO1
JBT1
LED2
JPME2
JVR1
JSTBY1
JL1
3 1
2
LAN1 USB2/3(3.0)USB0/1(3.0)
LAN2
VGA
4
IPMI_LAN
X10DRW-i(T)
Rev. 1.01
CPU2
CLOSE 1st
OPEN 1st
CPU1
OPEN 1st
2-19
Chapter 2: Installation
LAN Ports
Pin Definition
Pin# Definition
1 P2V5SB 10
2 TD0+ 11
3 TD0- 12
4 TD1+ 13
5 TD1- 14
6 TD2+ 15
7 TD2- 16
8 TD3+ 17
9 TD3- 18
(NC: No Connection)
1. VGA
2. LAN1 (10G-LAN for X10DRW-iT,
GLAN for X10DRW-i)
3. LAN2 (10G-LAN for X10DRW-iT,
GLAN for X10DRW-i)
4. IPMI_LAN (GLAN for X10DRW-i(T))
4
1 2
SGND
Act LED
P3V3SB
Link 100 LED
(Yellow, +3V3SB)
Link 1000 LED
(Yellow, +3V3SB)
Ground
Ground
Ground
Ground
3