Internal Speaker; Tpm/Port 80 Header - Supermicro SUPERO X10DRW-i User Manual

Internal Speaker

The Internal Speaker (SP1) provides
audible indications for various beep
codes. See the table on the right for
pin definitions. Refer to the layout
below for the location of the Internal
Buzzer.

TPM/Port 80 Header

A Trusted Platform Module/Port 80
header, located at JTPM1, provides
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See
the table on the right for pin definitions.
B
A
SP1
BMC
IPMI
J35
Flash
BIOS
PCH
I-SGPIO2
I-SGPIO1
JBT1
LED2
JPME2
JSTBY1
JL1
LAN1 USB2/3(3.0)USB0/1(3.0)
LAN2
UID-SW
LAN
CTRL
X10DRW-i(T)
Rev. 1.01
CPU2
CLOSE 1st
BIOS
LICENSE
CPU1
CLOSE 1st
OPEN 1st
JVR1
2-29
Chapter 2: Installation
Internal Buzzer
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm Speaker
TPM/Port 80 Header
Pin Definitions
Pin # Definition
1 LCLK
3 LFRAME#
5 LRESET#
7 LAD 3
9 +3.3V
11 LAD0
13 SMB_CLK4
15 +3V_DUAL
17 GND
19 LPCPD#
A. Internal Speaker
VGA
(Buzzer)
IPMI_LAN
B. TPM/80 Port
OPEN 1st
Pin # Definition
2 GND
4 <(KEY)>
6 +5V (X)
8 LAD 2
10 LAD1
12 GND
14 SMB_DAT4
16 SERIRQ
18 CLKRUN# (X)
20 LDRQ# (X)