Sanofi-aventis BG STAR Owner's Manual page 39

[3] Select An Alarm to Set: Choose the alarm you want to set with the DOWN (
arrow buttons. If this is your first time setting an alarm, use AL1. Press the CHECK (
to confirm your selection and advance to the alarm ON or OFF section.
[4] Turning Alarms ON or OFF: Turn the alarm ON or OFF with the DOWN (
arrow buttons. Your selection will be highlighted by the blinking of the symbol. Press the
CHECK ( ) button to confirm your selection and move to the set alarm time section.
[5] Set Alarm Time: You can now set the alarm time. First, set the hour (flashing numbers) with
the DOWN ( ) or UP (
arrow buttons. Press the CHECK (
Set the minute (flashing numbers) with the DOWN (
CHECK ( ) button to confirm the minutes and return to the MENU Mode.
Note: The volume of an alarm will be affected by your meter's volume setting, which can be
changed in the meter's "BEEP" option. If your meter has the volume turned OFF, then the alarm
will not sound, but the backlight will flash.
Application number: 184338
Date of revision: August 18, 2011
s-a Version 2.1 dated August 26, 2011
) arrow buttons. Accelerated change is possible by holding down the
) button to confirm the hour and advance to the minutes.
) or UP ( ) arrow buttons. Press the
) or UP ( )
) button
) or UP ( )
Page 39 of 48