Table of Contents
Advertisement
[7] Set the upper limit of the postmeal glucose target range (flashing) with the DOWN (
) or UP
(
) arrow buttons. Press the CHECK (
) button to confirm your selection and return to the
menu.
18 Setting Alarms
CHAPTER
There are 7 alarms you can set to remind you when to test your glucose levels.
When alarms are activated:
[1] If an alarm is set and the BGStar Meter is deactivated, the alarm will activate the meter.
"AL1" through "AL7" (depending which alarm is set) is displayed. The display backlight flashes,
and the meter will beep repeatedly for 15 seconds.
[2] You can turn the alarm OFF by pressing any button.
[3] The alarms will not appear during menu and test modes. If an alarm is set to sound or flash
while using these modes, it will alarm after the meter is deactivated.
CAUTION: Follow your health professional's recommendations on when and how often to test
your glucose.
How to set alarms:
[1] Enter MEM Mode: When your meter is deactivated, press the CHECK (
) button once to
enter menu mode. The word "MEM" is displayed.
[2] Enter Alarm Option: Press the DOWN (
) or UP (
) arrow buttons until the word
"ALARM" is displayed. Press the CHECK (
) button to enter and set an alarm.
Application number: 184338
Page 38 of 48
Date of revision: August 18, 2011
s-a Version 2.1 dated August 26, 2011
Hide quick links:
Advertisement
Table of Contents
