Sanofi-aventis BG STAR Owner's Manual page 19

IMPORTANT:
[1] Remove the test strip from the blood sample as soon as you hear the beep.
[2] Do not press the BGStar Test Strip against the test site.
[3] Do not scrape blood onto the BGStar Test Strip.
[4] Do not apply blood to the top side of the BGStar Test Strip.
[5] Do not apply blood to the BGStar Test Strip when the test strip is out of the meter.
[6] Do not put blood or foreign objects into the BGStar strip port. Doing so may lead to system
failure.
[7] Do not apply more blood after beep.
[8] Carefully read the test results on the display before making any treatment decisions.
Remove Test Strip from Blood Sample when you hear the beep: Your meter will beep once,
when you should remove the tip of the BGStar Test Strip from the blood sample.
BEEP
On the meter display, the droplet symbol fills. The scrolling bar and 1-2-3 indicates that the meter
is calculating your results.
Droplet
Symbol:
Your test is completed when your blood glucose test result with time and date is shown on the
display. If the volume is ON, you will hear a beep. Your test result is now stored in the memory.
Application number: 184338
Page 19 of 48
Date of revision: August 18, 2011
s-a Version 2.1 dated August 26, 2011