Table of Contents
Advertisement
[3] You should see a display with the message blinking "M-d" or "d-M", this means you are
ready to set the meter's date. Select the M-d (Month-Day) or d-M (Day-Month) date format with
the DOWN (
) or UP (
) arrow buttons. Your selection will be highlighted by the blinking of
the symbol. Press the CHECK (
) button to confirm your selection and continue on to the year
setting.
[4] Set the year (flashing) with the DOWN (
) or UP (
) arrow buttons. Your selection will be
highlighted by the blinking of the symbol. Press the CHECK (
) button to confirm your
selection and continue on to the month setting.
[5] Set the month (flashing) with the DOWN (
) or UP (
) arrow buttons. Press the CHECK
(
) button to confirm your selection and continue on to the day setting.
[6] Set the day (flashing) with the DOWN (
) or UP (
) arrow buttons. Press the CHECK (
)
button to confirm your selection and return to the menu.
Application number: 184338
Page 34 of 48
Date of revision: August 18, 2011
s-a Version 2.1 dated August 26, 2011
Hide quick links:
Advertisement
Table of Contents
