Table of Contents
Advertisement
WARNING: Your health professional should recommend what your hyperglycemic limit is.
[1] When your meter is deactivated, press the CHECK (
) button once to enter menu mode. The
word "MEM" is displayed.
[2] Press the DOWN (
) or UP (
) arrow buttons until the abbreviation "HYPER" is
displayed.
[3] Press the CHECK (
) button to enter and edit the Hyperglycemic Warning Alarm settings.
[4] Set the Hyperglycemic Alarm ON or OFF with the DOWN (
) or UP (
) arrow buttons.
Your selection will be highlighted by the blinking of the symbol. Press the CHECK (
) button
to confirm your selection and move on to the hyperglycemic threshold setting.
[5] Set the hyperglycemic threshold (flashing) with the DOWN (
) or UP (
) arrow buttons.
Press the CHECK (
) button to confirm your selection and return to the menu.
17 Setting The Glucose Target Range
CHAPTER
The BGStar includes a unique positive feedback feature where a happy face symbol is displayed
with test results that fall within the glucose target range. By setting a target range for what your
glucose levels should be before or after a meal, you customize when this symbol appears. Always
consult your health professional for your recommended target ranges.
IMPORTANT: First set the hypoglycemic and hyperglycemic warning alarms to your
recommended thresholds before making changes within the glucose target range menu (refer
to chapters 15-16 for setting these alarms).
Note: The glucose target range is limited by the values set for your hypoglycemic and
hyperglycemic warning alarms. Your meter will not allow you to select a number beyond these
alarm settings, even if the warning alarm is turned off. For example: If you want the premeal
target range to begin at 5.0 mmol/L, then the hypoglycemic alarm needs to be set at 5.0 mmol/L
Application number: 184338
Page 36 of 48
Date of revision: August 18, 2011
s-a Version 2.1 dated August 26, 2011
Hide quick links:
Advertisement
Table of Contents
