Front Point Of Reversal Of The Thread Catcher - Pfaff 2483-980/31 Instruction Manual

13

Front point of reversal of the thread catcher

.06.04
Requirement
At the front point of reversal of thread catcher 4, the tip of the thread catcher cutout should
be 1 mm in front of the bobbin case position finger 5.
Fig. 13 - 20
Position roller lever 1 at the lowest point of the control cam.
Adjust bush 2 (screws 3) according to the requirement.
1
2
3
5
Adjustment
1
89-025
4
13 - 23