Table of Contents
Advertisement
Nähen
10
Programmed sewing
.02
In programmed sewing various seam programs can be called up by selecting the
corresponding program number. A number of seam sections with corresponding functions can
be allocated to each seam program. The number of possible seam programs and seam
sections is set with the parameters "492" or "493", see Chapter 13.11 Parameter settings.
In addition to just sewing, that is to say working through seam programs, in programmed
sewing seam programs can be entered and altered, also see Chapter 11.01 Entering seam
programs.
After the machine has been switched on (Chapter 7.01 Main switch) and the programmed
sewing mode has been selected with the PM key, the display appears for selecting the pro-
gram number, seam section and stitch length.
If other functions, such as sensor or stitch count have been activated, it is possible to switch
to other displays for entering corresponding values by pressing the scroll key.
Functions in programmed sewing, also see Chapter 7.07.02 Function keys:
Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal.
10 - 2
PM
15
1
The number of backtack stitches is set in manual sewing, see Chapter 9.09
Entering the start and end backtacks. The values entered apply to all seam
programs.
Start backtacks on/off
End backtacks on/off
Needle position raised on/off
Presser foot raised on/off
Presser foot raised after
thread trimming on/off
Thread trimming on/off
If several seam sections belong to one seam program, the separate seam
sections are sewn automatically one after the other.
2.0
Fixed speed on/off
Reverse sewing direction on/off
Manual seam end on/off
Programmed stop on/off
Sensor on/off
Stitch count on/off
Advertisement
Table of Contents
