Front Point Of Reversal Of The Thread Catcher - Pfaff 1051 Instruction Manual

Adjustment
11.

Front point of reversal of the thread catcher

06.04
Requirement
When the thread catcher 5 is at its front point of reversal, the rear edge of the thread
catcher cutout must be positioned 1 mm before the bobbin case position finger 6.
6
5
Fig. 11 - 26
Swing roller level 1 into the lowest point of the control cam 2.
Move thread catcher carrier 3 (screw 4) according to the requirement.
3
4
1
2
11 - 27