Table of Contents
Advertisement
Input
Selecting seam section 4
Selecting the functions for seam section 4
- The presser foot should be raised at the end of the seam section.
- The machine should stop at the end of the seam section.
- The end of the seam section should be recognised by sensor (0.8 mm seam depth).
11 - 7
Select seam section "4" with the corresponding +/- key.
Press the programmed stop key, to stop the machine automatically at the end of the
seam section.
Press the sensor key for recognition of the end of the seam section by sensor.
7
Press the scroll key to enter the seam depth.
PM
7
3
2.0
PM
7
4
2.0
PM
4
2.0
PM
6.0
Advertisement
Table of Contents
