Press the scroll key to enter the seam depth.
With the corresponding +/- key set the value for the seam depth at "0.8".
The actual value for the seam depth is made up of the desired seam depth and
the appropriate positive or negative correction value, when the angle on the ma-
terial is not equal to 90°.
Press the scroll key to be able to select the next seam section.
Selecting seam section 7
Select seam section "7" with the corresponding +/- key.
PM
7
6
2.0
PM
0.8
PM
7
6
2.0
PM
7
7
2.0
Input
11 - 10