Sinclair ASGE-09AIN WK Service Manual page 113

18K:
Remark : Before disassembly and assembly, make sure that the unit has been cut off from the power supply.
Step
1. Remove external casing
2. Remove motor
3. Remove compressor
4. Assemble unit
Illustration Handling Instruction
1. Remove the top cover and handle;
2. Remove the grille, outer case and right side plate.
1. Remove the blade nut and then remove the blade;
2. Remove the motor from motor support.
1. Discharge the refrigerant inside the pipeline
and recycle the refrigerant during discharging;
2. Unsolder the 4-way valve assy from compressor;
4. Take away the compressor from chassis.
Assemble the unit in the reverse
procedures of disassembly.
103